Taking Your current Pinball Machine.

One of the responsibilities involved in investing in a new pinball machine is knowing the method that you is likely to be transporting it without damaging it. If you’re planning to be ponying up a decent wad of cash to acquire a pinball machine, it’s advisable to discover ways to move it from point A to point B and still keep it in the same condition it had been when it started its journey.

Firstly, and possibly most obviously, you’re planning to need a vehicle that’s big enough to hold it. It may be a van, truck, or trailer but it’s planning to need space to hold a product that, when folded down will measure 76cm wide, 76cm tall and 140cm deep.

Never try to transport a pinball machine in its fully assembled configuration – this way lies heartbreak all round.

Before attempting to put the pinball machine in your car or truck, you first need to fold down the headboard. All the now manufactured pinball machines and by that I’m speaing frankly about those who were created from around 1980 onwards, Arcade games for sale¬†are created with hinges allowing the headboard to be folded. Otherwise, your pinball machine can have a headboard that’s bolted into place.

To get at the bolts on an older pinball machine you will need to remove the backing panel. When you undo the bolts you’ll also need to unplug the connectors that run-down in to the box. If you’re focused on remembering where these connectors go, it could be advisable to label them.

After the headboard has been folded on top of the machine, you will need to remove the pinball machine legs. While removing the legs, make sure you pay attention to leading legs and back legs to prevent confusion when reattaching them if you have reached your destination. With some makes of pinball machine, the legs could be the same length front and back which makes it difficult to tell them apart. Others, such as for instance Sega pinball machines, the legs are longer at the trunk than the front – easier to tell which goes where.

Be sure you have removed the balls from the device, that you don’t want them bouncing around everywhere in transit. Also, make certain the coin return door has been secured if you’d opened it while undoing the legs.

Loading the pinball machine in to a vehicle is just a two-person job. Simply load one end (front first usually works best) onto the tray and then slide it in. Because you’ve folded the headboard down it will likely be lying through to leading end of the table. Loading the pinball machine front first will put the heavy end closest to the vehicle’s cabin and will prevent nearly all potential movement. Make sure the device is securely tied down with straps and you’re on your way.

When you’ve arrived at your destination, it’s usually advisable to slide the device halfway from the vehicle, attaching the legs to 1 end before sliding it out the rest of the way and attaching another legs. After the pinball machine is in position, reassemble the headboard and you’re ready to enjoy your pinball machine.

Published
Categorized as Others

Leave a comment

Your email address will not be published. Required fields are marked *